• Removes at the same time iron, manganese and hardness by ion exchange
• Removes manganese, difficult to remove by classic oxidation
• Absorption of NH3
• Increases the pH (absorption H+)
• Excellent filtration of non-dissolved particles
• A regeneration needs 30% less NaCl than when using classic softeners resins
• Chlorine has no negative impact on Crystal Right and is stronly advised when regenerating to counterattack the proliferation of bacteries.
• No specific requirements for pumps as the backwash flow is lower than the service flow
• Delivered in convenient bags of 22,7kg (28,3L)
• When used appropriately, Crystal Right has a lifetime of 20 year

• Minimal hardness CR100/CR200: 51ppm / 5.1°F / 2,87°dH
• TDS CR100 / CR200: > 80 mg/L
• Water pH range CR100: 6.3-11.0 / CR200: 7.0-11.0
• Max. content of iron- and manganese: 15 mg/L
• Capacity CR100: 30 m³/ppm; 3 m³/°F; 1,7 m³/°dH
• Capacity CR200: 40 m³/ppm; 4 m³/°F; 2,25 m³/°dH
• NH4+ will be removed by CR100 and CR200 with the help of the chlorinator
• CR100 will do a pH correction:
  • pH measured at the well from 5,7 to 7 or higher
  • pH measured in a lab from 6,3 to 7 or higher
• Crystal-Right cannot be rinced with classic resin cleaners, CR Clear Out is to be used.

Flow and capacity may vary depending on the quality of the water. We advise in all cases a test with the ‘mini CR test’.